Conference Papers
10. 심규호, 김성권, 박영채, “프리피스톤 스털링 냉동기의 공진특성규명 및 재생기 공극률에 따른 냉동 성능측정, 한국유체기계학회 (2018.11)

9. Yeong-chaePark, Dong-Jun Kim and KyuhoSim, “Development of Coupled Thermodynamics-Dynamics Model Considering Heat Transfer Characteristics in Free-Piston StirlingEngines”, The 18th International Stirling Engine Conference (2018.09)

8. 심규호, 박영채, “프리피스톤 스털링엔진의 열전달특성을 고려한 열역학-동역학 연계해석모델 제시 및 검증”, 한국소음진동공학회 (2018. 04)

7. 심규호, 박영채, “개선된 준정상 유동모델을 이용한 1kW급 프리피스톤 스털링엔진의 실험검증”, 한국소음진동공학회 (2017. 10)

6. 심규호, 박영채, “스털링엔진의 열특성 및 성능규명을 위한 열역학모델의 비교분석 및 고찰” 한국소음진동공학회 (2017. 04)

5. 심규호, 박영채, “프리피스톤 스털링엔진을 위한 정압 가스베어링의 윤활해석 및 실험”, 한국소음진동공학회 (2016. 10)

4. 심규호, 박영채, 김동준, 문태준, “프리피스톤 스털링엔진의 충진압력/온도변화에 따른 동적 거동특성 및 성능 측정”, 한국소음진동공학회 (2016. 04)

3. 박영채, 심규호, “공진형 모션 정류에너지 하베스터의 파력 발전 적용을 위한 실험적 고찰”, 한국소음진동공학회 (2015. 10)

2. 박영채, 심규호, “소형 파력 발전을 위한 공진형 모션 정류에너지 하베스터의 진동 특성 및 발전 성능측정”, 한국소음진동공학회 (2015. 06)

1. 박영채, 심규호, “공진형 모션정류에너지 하베스터의 해석모델 예측 및 성능 실험”, 대한기계학회 (2015.05) 

International Journal Papers (SCI)
4. Jisu Park, and Kyuho Sim*, 2019, “Rotordynamic Model Predictions of Gas Foil-Polymer Bearings based on Polymer Elasticity along with Structural Parameter Identifications,” Journal of Tribology International, will be submitted in early of 2019.
3. Jisu Park, Donghee Kim, and Kyuho Sim*, 2019, “An Experimental Feasibility Study on Real-Time Preload Control of Gas Foil Bearings via Piezoelectric Actuators,” Journal of Tribology International, will be submitted in early of 2019.
2. Jisu Park, and Kyuho Sim*, 2018. 10., “A Feasibility Study of Controllable Gas Foil Bearings with Piezoelectric Materials via Rotordynamic Model Predictions,” ASME Journal of Engineering for Gas Turbines and Power, 141(2), pp. 021027.
1. Kyuho Sim*, and Jisu Park, 2017. 04., “Performance Measurements of Gas Bearing with High Damping Structures of Polymer and Bump Foil via Electric Motor Driving Tests and 1-DOF Shaker Dynamic Loading Tests,” ASME Journal of Engineering for Gas Turbines and Power, 130(9), pp. 092504.  

Domestic Journal Papers (South Korea)
4. Jisu Park, Kyuho Sim*, and Sung-Ho Lee, 2019, “Rotordynamic Model Development with Consideration of Rotor Core Lamination for 2.2 kW-Class Squirrel-Cage Type Induction Motors and Influence Investigation of Bearing Clearance,” Journal of Soc. Tribol. Lubr. Eng., In review.
3. Kyuho Sim*, Jisu Park, and Sanghun Lee, 2015. 10., “Identification of Frequency-Dependent Dynamic Characteristics of a Bump Structure for Gas Foil Bearings via 1-DOF Shaker Tests Under Air Pressurization,” Journal of Trans. Korean Soc. Mechanical Engineering A, 39(10), pp. 1029–1037.
2. Kyuho Sim*, and Jisu Park, 2015. 04., “Measurement of Micro Gas Turbine Power Pack Performance for Electric Vehicle Range Extenders under Various Electric Loads and Gear Ratios,” Journal of Trans. Korean Soc. Mechanical Engineering B, 39(4), pp. 371–378.
1. Kyuho Sim, Jisu Park, and Seon-Jun Jang*, 2015. 01., “Electro-Mechanical Modeling and Performance Analysis of Floating Wave Energy Converters Utilizing Yo-Yo Vibrating System,” Journal of Trans. Korean Soc. Mechanical Engineering A, 39(1), 79–87. 

International Journal Papers (SCI)
1. Jisu Park, Donghee Kim, and Kyuho Sim*, 2019, “An Experimental Feasibility Study on Real-Time Preload Control of Gas Foil Bearings via Piezoelectric Actuators,” Journal of Tribology International, will be submitted in early of 2019.

Korean Conference Papers
2. 김동희, 박지수, 심규호, 2018. 11,“가스포일 베어링의 실시간 압전제어 성능에 대한 실험적 타당성 연구”, 학국유체기계학회, 유체기계 연구개발 발표회 논문집, pp. 341~342

1. 김동희, 심규호, 2018. 04, “프리 피스톤 스털링 엔진의 파워피스톤 정압갑스베어링에 대한 점성 및 쿨롱 감쇠 특성 규명,” 소음진동공학회, 2018년도 춘계 학술대회 초록집, pp. 168~168. (포스터) 

djidft@naver.com

Korean Conference Papers
1.이충현,심규호“차량용 타이어의 유니포미티 해석을 통한 진동학적 성능 분석 및 시뮬레이션 예측” 한국유체기계학회 2021. 07 281 - 282 (2page)

dlcndgus920@naver.com 

International Journal Papers (SCI)
5.Kim, D. J., Park, J. S., & Sim, K. (2022). Development and performance measurements of a 2.5 kW-class free-piston Stirling converter with detailed design and fabrication processes. Energy Reports, 8, 15011-15026. 

4. Kim, D. J., Park, Y., Kim, T. Y., & Sim, K. (2022). Design optimization of tubular heat exchangers for a free-piston Stirling engine based on improved quasi-steady flow thermodynamic model predictions. Energies, 15(9), 3326.
3.Lee, C. H., Kim, D. J., Kim, S. K. and Sim, K. (2021). Design Optimization of Flexure Springs for Free-Piston Stirling Engines and Experimental Evaluations with Fatigue Testing. Energies, 14,
5156. 

2.Kim, D. J., and Sim, K. (2021). Linear Dynamic Analysis of Free-Piston Stirling Engines on Operable Charge Pressure and Working Frequency along with Experimental Verifications. Applied Sciences, 11(11), 5205.  

1. Sim, K. and Kim, D. J., 2017, "Development and Performance Measurements of A Beta-Type Free-Piston Stirling Engine along with Dynamic Model Predictions,"ASME Journal of Engineering for Gas Turbines and Power

Korean Journal Papers
4.김동준, 허승, 심규호, 201812, “프리피스톤 스털링 엔진의 유체 부하에 따른 동적 특성 및 성능 측정 실험”, 한국유체기계학회 논문집, 21(6), 64-70.

3.김동준, 201611, “스털링 엔진의 진동 해석 및 설계”, 한국소음진동공학회 소음진동 제 26권 제 6호 pp. 15-19.
2. 심규호*, 김동준, 201606, “프리피스톤 스털링 엔진의 동역학 모델 예측을 통한 비선형 부하 감쇠 특성에 관한 고찰,” 한국소음진동공학회 논문집, 26(3), 248-257.

1. 심규호*, 김동준, 201510, “자유피스톤 스털링 엔진의 비선형 부하 감쇠를 고려한 동역학 모델 예측 및 검증,” 대한기계학회 논문집A, 39(10), pp. 985-993.

International Conference Papers  

3.Dong-Jun Kim (Presenter) and Kyuho Sim, 2018.9.19, Analytical Identification of Cross-Coupled Stiffness Effects on Free-Piston Stirling Engine Performance via Dynamic Model Predictions, I
SEC2018, September 19^th – 21^st, Tainan, Taiwan, 144.

2.Yeong-chae Park, Dong-Jun Kim and Kyuho Sim, 2018.9.19, Development of Coupled Thermodynamics-Dynamics Model Considering Heat Transfer Characteristics in Free-Piston Stirling Engines, ISEC2018, September 19^th – 21^st, Tainan, Taiwan, 146.
1. Sim, K., and Kim, D. J., 2016, “Development and Performance Measurements of A Beta-Type Free-Piston Stirling Engine along with Dynamic Model Predictions”, ASME Turbo Expo 2016, Seoul, Korea, June 13-17, 2016, GT2016-57207

​djkim6300@gmail.com